Caution! Care and cleaning
Before maintenance, switch off the appliance and disconnect the mains plug from the
•
mains socket.
Do not clean the appliance with metal objects, steam cleaner, ethereal oils, organic
•
solvents or abrasive cleansers.
Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.
•
Installation Important!
For electrical connection carefully, follow the instructions given in this manual.
•
Unpack the appliance and check if there are damages on it. Do not connect the
•
appliance if it is damaged. Report possible damages immediately to the place you bought it.
In this case retain packing.
It is advisable to wait at least 4 hours before connecting the appliance to allow the oil to
•
flow back in the compressor.
Adequate air circulation should be around the appliance, lacking this leads to
•
overheating. To achieve sufficient ventilation, follow the instructions relevant to installation.
Wherever possible the back of the product should not be too close to a wall to avoid
•
touching or catching warm parts (compressor, condenser) to prevent the risk of a fire, follow
the instructions relevant to installation.
The appliance must not be located close to radiators or cookers.
•
Make sure that the mains plug is accessible after the installation of the appliance.
•
ENERGY SAVINGS
To reduce the power consumption of your device:
Install it in a suitable location (see "PARTICULAR PRECAUTIONS ").
•
Keep the doors open for as short time as possible.
•
Ensure the optimal functioning of your device by periodically cleaning the condenser (see "
Daily use").
Periodically check the door seals and make sure they always close effectively. If this is
•
not the case, please contact your after-sales service.
Service
Any electrical work required to do the servicing of the appliance should be carried out by
•
qualified electrician or competent person.
This product must be serviced by an authorized Service Center, and only genuine spare
•
parts must be used.
This appliance is for domestic use only. The manufacturer can not be held responsible