Nuna IVVI Mode D'emploi page 18

Assemble Front Wheels
1 Assemble front wheels to front legs. Check that wheels are securely
attached by pulling down.
2 To disassemble front wheel, detach front wheel from front leg
while pressing the release button.
Assemble Rear Wheels
1 Assemble rear wheels to rear legs. Check that wheels are securely
attached by pulling outward.
2 To disassemble rear wheel, detach rear wheel from rear wheel mount
(6)-2
Assemble Canopy
1 Clip the canopy mounts onto the seat, then close the zippers.
(7) (8)
2 Open the zippers, then remove the canopy mount to remove the
canopy.
Assemble Armbar
1 Align the armbar ends with the armbar mounts, and then insert to lock.
(10)
2 To disassemble armbar, press armbar release button
pull out the armbar.
3 The completely assembled stroller is shown as
17
while pressing the release button.
(9)
(11)-2
(3)
(4)-1
(5)
(6)-1
(4)-2
(11)-1
, and then
(12)