Husqvarna 520iLX Manuel D'utilisation page 10

• Make sure that no clothes or
parts of the body come in
contact with the cutting
attachment when the product
is activated. Keep the product
below waist level.
• If anything jams in the cutting
attachment while you operate
the product, stop and
deactivate the product. Make
sure that the cutting
attachment stops completely.
Remove the battery before
you clean, inspect or repair
the product and/or the cutting
equipment. There is a risk of
burns as the gear housing
can become very hot. Use
gloves when working with the
trimmer head.
• Keep your hands and feet
away from the cutting
attachment until it has
stopped completely when the
product is deactivated.
• Watch out for stumps of
branches that can be thrown
out when you cut. Do not cut
to close to the ground where
stones and other objects can
be thrown out.
• Watch out for thrown objects.
Always wear approved eye
protection. Never lean over
the cutting attachment guard.
Stones, rubbish, etc., can be
thrown up into the eyes which
10
can cause blindness or
serious injury.
• Listen out for warning signals
or shouts when you wear
hearing protection. Always
remove your hearing
protection as soon as the
product stops.
• Never work from a ladder,
stool or any other raised
position that is not fully
secured.
• If any unwanted vibrations
occur, tap out new line to give
the line the correct length to
stop the vibrations.
• Overexposure to vibration can
lead to circulatory damage or
nerve damage in persons
who have poor circulation.
Speak to your physician if you
experience symptoms of
overexposure to vibration.
Such symptoms include
numbness, loss of feeling,
tingling, pricking, pain, loss of
strength, changes in skin
colour or condition. These
symptoms usually show in the
fingers, hands or wrists.
• Always hold the product with
both hands. Hold the product
on the right side of your body.
• Do not remove the cut
material, or let other persons
remove cut material, while the
product is on or the cutting
756 - 007 -