GEO plast GEOtank Mode D'emploi page 54

Návod na obsluhu / Manual / Mode d´emploi - GEOtank
6. Suction cleaning:
•
Turn off the gear motor (e.g.: heating control – manual operation)
•
Turn fan on to continuously running
•
Plug off both hoses in the cover unit
•
Loosen return air hose in the cover unit
•
Connect siphon pipe by turns 10 sec at the the time to both sockets (1x to the right - 1x to the
left) – during the constant change of direction, the congestion of the pellets can be extracted
•
Repeat the procedure as long as there are no more pellets left at the hand-over-point of the
holding system or siphon pipe
•
Attach both hoses again (siphon pipe and return air hose)
•
Re-establish the normal mode (add gear motor,...)
Pellets hose
Zuführschlauch
(Saugschlauch)
Air hose
Rückluftschlauch
Pellets hose
Zuführschlauch
(Saugschlauch)
Air hose
Rückluftschlauch lose in
den Domschacht legen
V00070130
54