Operating Range Of Remote Control - Pioneer VSX-820 Mode D'emploi

02 Controls and displays
PRESET /
Use to select preset radio stations
(page 49) and to select SIRIUS Radio
channels (page 66).
8 MASTER VOLUME dial
9 PHONES jack
Use to connect headphones. When the
headphones are connected, there is no sound
output from the speakers (page 41).
10 Listening mode buttons
AUTO/DIRECT
Switches between Auto surround mode
(Auto playback on page 33) and Stream
Direct playback. Stream Direct playback
bypasses the tone controls for the most
accurate reproduction of a source
(page 36).
STEREO/ALC
Switches between stereo playback, Auto
level control stereo mode (page 35) and
Front Stage Surround Advance modes
(page 35).
STANDARD
Press for Standard decoding and to switch
between the various 2 Pro Logic II, 2 Pro
Logic IIx, 2 Pro Logic IIz and NEO:6
options (page 32).
ADV SURROUND
Switches between the various surround
modes (page 34).
11 iPod iPhone DIRECT CONTROL
Change the receiver's input to the iPod and
enable iPod operations on the iPod (page 60).
12 iPod iPhone/USB terminal
Use to connect your Apple iPod or USB mass
storage device as an audio source (page 58
and page 61).
13 AUDIO/VIDEO input
See Connecting to the front panel video terminal
on page 28.
10
En
14 MCACC SETUP MIC jack
Use to connect a microphone when
performing Auto MCACC setup.

Operating range of remote control

The remote control may not work properly if:
• There are obstacles between the remote
control and the receiver's remote sensor.
• Direct sunlight or fluorescent light is
shining onto the remote sensor.
• The receiver is located near a device that is
emitting infrared rays.
• The receiver is operated simultaneously
with another infrared remote control unit.
30°
30°
7 m (23 ft.)