Safety Warnings - Festool OF 1010 REBQ Notice D'utilisation

Contents
1 Symbols..................................................... 15

2 Safety warnings.........................................15

3 Intended use..............................................16
4 Technical data........................................... 16
5 Parts of the device.....................................17
6 Commissioning..........................................17
7 Settings......................................................17
8 Working with the electric power tool........19
9 Service and maintenance..........................20
10 Accessories............................................... 21
11 Environment.............................................. 21
12 General information.................................. 21
1 Symbols
Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear protective gloves when changing
tools and working with raw materials.
Wear a dust mask.
Wear protective goggles.
Pull out the mains plug
Do not dispose of it with domestic
waste.
Safety class II
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
Tip or advice
Handling instruction
Disconnecting the mains power cable
Connecting the mains power cable
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel­
evant regulations in the UK.
2 Safety warnings
2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Machine-specific safety notices
Hold the power tool by insulated gripping
-
surfaces only, because the cutter may
contact its own cord. Cutting a "live" wire
may make exposed metal parts of the pow­
er tool "live" and could give the operator an
electric shock.
Use clamps or another practical way to se­
-
cure and support the workpiece to a stable
platform. Holding the work by your hand or
against the body leaves it unstable and may
lead to loss of control.
- Only cutters provided by Festool for this
purpose may be mounted on the power
tool. The use of other cutters is prohibited
due to the increased risk of injury.
- The maximum rotational speed specified
on the tool must not be exceeded or the
rotational speed range must be observed.
Accessories that rotate faster than the per­
missible level can rupture.
- Wait until the power tool has come to a
complete halt before placing it down. The
insertion tool can get caught and lead to a
loss of control of the power tool.
- In the case of materials to be processed
which can become statically charged or
lead to static charging, a dissipative overall
system consisting of an antistatic suction
hose (AS) and extraction mobile must be
used.
English
15