Clarion DVC920 Mode D'emploi page 6

T H R O
Setting Acoustic Features (ADJUST MODE)
5. Press the [ADJUST] button to return to the
original mode.
Setting speaker filter frequency
(FILTER)
This function is used to set a filter frequency that
suits the frequency characteristics of the used
speakers.
• The initial value of [F HPF], [SRD HPF] is
[THROUGH] (no filter).
• The initial value of [CTR HPF], [SW LPF] is
[120 Hz]
• A speaker that was turned off in the Section
"Turning speakers on or off" is not displayed.
1. Press the [ADJUST] button to enter the AD-
JUST MODE.
2. Press the [ ] or [ ] [DISP] button to change
to the [
10
DVC920
280-7804-00