dirna Bergstrom bycool blue line MOCHILA Instructions De Montage page 20

EN ES
MOCHILA
OPERATIONS TO BE CARRIED OUT TO
ASSEMBLE WATER TANK
Place tank support on the most suitable lower
1
part of the rear area of the cab. Mark and drill
Ø 9 on the cab bearing in mind the vertical
position of the support. Minimum (6) fastening
drill holes.
Place M6 riveting nuts and fasten support using
2
6/100x30 screws
(*) in case it does not rest on smooth part, place
10mm.separator and 6/100x40 screw.
Fasten pump set to tank with (2) 5.4x19mm
3
sheet thread screws.
Rivet nut
20
Grower washer Ø 6
Flat washer Ø 6
Supports
Tank
6/100x30
Grower washer Ø 6
Flat washer Ø 8
Support
Rear part cab
6/100x40 (*)
10 mm separator (*)
Rear part cab (*)
®
1
Allen screw
6/100x30
2
3