dirna Bergstrom bycool blue line MOCHILA Instructions De Montage page 16

EN ES
MOCHILA
Centre pattern according to measure (cases C
1
and D), mark (4) holes and the (4) corners of cut
and drill at Ø8.
From inside of cabin, join the (4) points of cut
2
and cut upholstery with a cutter (so that when
cutting from outside, upholstery is not torn) and
make 20x20mm cuts around the (4) holes.
From outside of cabin, join the (4) corners and
3
cut sheet (outer part) using a jigsaw. Protect cut
with red lead or paint.
Clue joint around the (4) holes as shown on
4
photo.
a- Depending on how many mm the edge or
original cabin ribs stick out, use 15, 25 or
30mm. joints, all of them being provided, so
that it is as close to the cabin as possible.
1
2
3
16
®
20x20
4b
4