Sensor Operation; Child Lock - Sharp R-956INW Mode D'emploi

SENSOR OPERATION

Sensor cooking mode takes the guesswork away from microwave cooking. The oven will estimate
the weight and volume of food to adjust the cooking power and time automatically.
1. In standby mode, press the corresponding SENSOR MENU button to choose the appro-
priate food.
2. Press START/+30SEC button to start the programme. The oven will choose the appropri-
ate cooking time and microwave power level and start the process. The timer will start to
count down.
3. When the process is over, the oven will emit a sound and return to standby status. If the
clock has not been set, the display will show 0:00. Otherwise the current time will be
displayed.
Notes:
• Before the timer count down starts, you can open the door or press the STOP/CLEAR
button to cancel the SENSOR programme and return to the standby mode.
• Once the timer count down starts, if you open the oven door or press the STOP/CLEAR
button, the oven will enter the pause mode.
• If the sensors cannot detect the food or the sensed settings exceed the appropriate value,
the buzzer will sound and the oven will return to the standby mode.
Food
Vegetables
Fish
Meat
Pasta
Potatoes
Soup
Reheat

CHILD LOCK

1. If there are no operation for 1 minute when the oven is in standby mode, or if there is no
operation for 10 minutes after cooking finished,the oven will enter the children-lock state
and the indicator will illuminate together with the current clock time. If the clock
has not been the display will show "0:00".
2. To cancel the CHILD LOCK:
In the stand-by mode, open the door to release the lock
Weight
200-600g
200-600g
200-600g
50-450g (450-1200ml cold water)
1-3
500-1000g
200-600g
GB-21
Display
SC-1
SC-2
SC-3
SC-4
SC-5
SC-6
Sr