External Audio Sources; Front Aux-In Socket; Sound Settings - Blaupunkt 200 Série Instructions D'utilisation Et D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 82
External audio sources | User settings

External audio sources

Front AUX-IN socket

Danger!
Increased risk of injury from
connector.
In case of an accident, the protruding connector
in the front AUX-IN socket may cause injuries. The
use of straight plugs or adapters leads to an in-
creased risk of injury.
For this reason, it is recommended to use angled
jack plugs.
As soon as an external audio source, such as a
portable MP3 player is connected to the front
AUX-IN socket; , it can be selected with the SRC
button . "AUX" then appears on the display.
Making settings in the "TUNER" menu
TRAFFIC INFO(tra c information)
(only for reception area EUROPE)
Only possible in FM radio mode: Switching prior-
ity for tra ce announcements on or o .
Settings: ON,OFF.
If priority is switched on for tra c information, the
display shows the icon
BAND SELECTION
Activating or deactivating memory banks.
Memory banks that can be deactivated:
Region
Memory banks
EUROPE
FM2, FMT, AM, LW
ASIA
USA
FM2, FMT, AM, AMT
THAILAND
Settings in each case: ON, OFF.
Note:
If a memory bank is deactivated, the stations
stored in this memory bank are retained.
REGIONAL
(only for reception area EUROPE)
Only possible in FM radio mode: Switching
REGIONAL function ON or OFF. Settings: ON,OFF.
SENSITIVITY
Setting the sensitivity of station seek tuning. Set-
tings: LO (low), HI (high).
RDS
Switching the RDS function is On or O . Settings:
ON,OFF.
AREA (reception area)
Select the reception area for the radio reception.
Settings: EUROPE, ASIA, USA, THAILAND.
DAB tuner settings (DAB models
only)
The following DAB settings can be changed in
the " DAB Tuner " menu:
BAND SELECTION
Activating or deactivating memory banks.
Memory banks that can be deactivated:
DAB 2 : ON or OFF.
DAB 3 : ON or OFF.
Calling and exiting the "AUDIO"
menu
.

Sound settings

The following sound settings can be changed in
the "AUDIO" menu:
• Adjusting bass and treble(- 7 -+7)
• Setting the left/right volume distribution
(Balance) or front/rear (Fader) (F7 -R7)
• Adjusting the increase of bass at low volume
(XBASS) (ON -OFF)
• Setting the 4-band equaliser (POP/ROCK
/CALSSIC /FLAT/OFF)
Making settings in the "VOLUME"
menu
ON VOLUME
Setting the power-on volume. Settings: ON VOL-
UME (power-on volume;1-40) or LAST VOLUME
(volume set last before switching o the car sound
system).
Brie y press the MENU button to open the
user menu.
Turn the rotary control until the "AUDIO" menu
item is selected.
12
12

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Palma 200 série

Table des Matières