Storing Stations Or Calling Stored Stations; Scanning Stations; Storing Stations Automatically (Travelstore); Cd (Cd Model Only)/Mp3/Wma Mode - Blaupunkt 200 Série Instructions D'utilisation Et D'installation

Region
EUROPE
ASIA
USA
THAILAND
Starting station seek tuning
Long press SRC button to start Travelstore.
The display shows "FM TSTORE".
Notes:
• For the reception area "EUROPE": In the FM wave-
band, only tra c information stations are turned
into if the priority for tra c information（
is switched on.
• The sensitivity of seek tuning can be
adjusted in seetting (High-Low).
Tuning into stations manually
Long press the
to manual seeking.
The display shows " MANUAL".
Brie y press the
the frequecny in decrements/increments step.
Storing stations or calling stored
stations
Select the desired memory bank.
If necessary, set the desired station.
Press the station button
2 seconds to store the current station under
the button.
- or -
Brie y press the station button 1 - 5 > to call
up the stored station.

Scanning stations

With the scan function, you can scan either every
receivable station or every stored station of the
current waveband.
Scanning all receivable stations of the waveband
Press the button MENU for approx. 2 seconds
to start scanning.During the scan, the display
shows "SCAN" and the current frequency as
well as memory bank or station name.
Brie y press the button 1-5 listening to the
station that you request.
9
9
Memory banks
FM1, FM2, FMT, AM1, AM2,AMT
button to change
button to change
1 - 5 for approx.
>
Radio mode | CD/MP3/WMA mode
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and stored the 5 FM stations o ering the strongest
reception in the region in the FMT memory bank.
Any previously stored stations in this memory
bank are deleted in the process.
Select a memory bank of the desired wave-
band, e.g. FM1 or AM.
Press the SRC button for approx. 2 seconds.
The tuner starts the automatic station seek
tuning; the display shows "FM TSTORE" or
"AM TSTORE". After the storing is completed,
the radio plays the station at memory location
) 1 of the FMT or AMT level.
CD (CD model only)/MP3/WMA
mode

Basic information

CD (CD model only)/MP3/WMA mode

This car sound system can be used to play back
audio CDs (CDDA) and CD-R/RWs with audio, MP3
or WMA les asa well as MP3 or WMA les on USB
data carriers .
Notes:
• To ensure proper functioning, use only CDs
with the Compact-Disc logo.
• Blaupunkt can not guarantee the awless function
of copy-protected CDs and all CD blanks,
USB data carriers available on the market.
Note the following information when preparing
an MP3/WMA data carrier:
• Naming of tracks and directories.
• CD formats: CD-R/RW, Ø: 12 cm
• CD data formats: ISO 9669 Level 1 and 2, Joliet
• CD burn speed: Max. 16x (recommended)
• USB format/ le system: Mass storage device FAT
16/32.
• File extension of audio les:
-.MP3/.WMA/.FLAC/.AAC/

Changing to CD/MP3/WMA Mode

Press the SRC button repeatedly until the desired
audio source is displayed:
• "CD": Inserted CD.
• "USB : USB data carrier connected.
• "AUX": Connected external audio source.