Medisana Shiatsu MC 820 Mode D'emploi page 33

Spot massage button
Switch on the device by pressing O
massage for back will response. Activate the Shiatsu function state by pressing
the Shiatsu massage button
holding the spot massage button
▲
or downward. Press
button . Press button
return to Shiatsu state.
Rolling massage button
Switch on the device by pressing O
massage function by pressing the Rolling massage button
you wish to massage with the back massage button (
Lower button (lower back)
The massage rolls
reversal of the direction takes place when the respective end positions are
reached.
Upper button (upper back)
The massage rolls
reversal of the direction takes place when the respective end positions are
reached.
Full button (full back)
The massage rolls
backrest, up to the shoulder area, massaging the back whilst doing so. Once
the uppermost position has been reached, the direction of the massaging rolls
is reversed. The heads then travel down to the base of the backrest. Once the
heads reach this point, the direction is reversed again and then travel up the
back again.
Press the button again to de-activate the rolling massage function;
Width button (
This button is effective only in the rolling massage state. Press the rolling
massage button to activate the rolling massage function.
Pressing and holding the width button
increases or decreases until the desired width is reached and you loose the button
.
▲ ▼
( )
n/Off button
. Massage heads rotate in a spot. Pressing and
changes position of massage heads upward
▼
or until the desired position is reached and loose the
again to de-activate the spot massage function and
n/Off button
travel up and down the lower half of the back. The
travel up and down the upper half of the back. The
move from the "Park" position at the base of the
)
, the distance between the rolls
3 Operating
.
Only under shiatsu state spot
.
Activate the Rolling
. Select the region
/ / ).
GB
19