Standard Accessories - HIKOKI C 3607DRA Mode D'emploi

English
SPECIFICATIONS
1. Power tool
Bevel
Max. Cutting
Capacity
Height × Width
Compound
Saw Blade Dimensions (oD × iD × Thickness)
Miter Cutting Angle
Bevel Cutting Angle
Compound Cutting Angle
Voltage
No-Load Speed
Machine Dimensions (Width × Depth × Height)
Battery available for this tool*
Weight**
Laser Marker
* Existing batteries
series, etc.) cannot be used with this tool.
** According to EPTA-Procedure 01/2014
Depending on attached battery.
The heaviest weight is measured with BSL36B18 (sold
separately).
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
2. Battery
Model BSL36A18
Voltage 36 V / 18 V (Automatic Switching*)
2.5 Ah / 5.0 Ah
Battery capacity (Automatic
Switching*)
Available cordless
products**
Available charger
* The tool itself will automatically switch over.
** Please see our general catalogue for details.
0°
Miter 45°
Left 45°
Right 45°
Bevel (Left) 45° + Miter (Left) 45°
Bevel (Left) 45° + Miter (Right) 45°
Bevel (Right) 45° + Miter (Right) 45°
Bevel (Right) 45° + Miter (Left) 31°
Bevel (Left) 0° – 45°
Bevel (Right) 0° – 45°
Maximum output
(Iambda)
Laser medium
(BSL3660/3620/3626,
BSL36B18
4.0 Ah / 8.0 Ah
(Automatic
Switching*)
Multi volt series, 18 V product
Sliding charger for lithium ion
batteries
BSL18....

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the
accessories listed on page 399.
Standard accessories are subject to change without notice.
APPLICATION
Cutting various types of wood.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1- second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 2 (on page 3).
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green. (See Table 1)
(1) Charge indicator lamp indication
The indications of the charge indicator lamp will be as
shown in Table 1, according to the condition of the
charger or the rechargeable battery.
42
58 mm × 310 mm
58 mm × 218 mm
39 mm × 310 mm
16 mm × 310 mm
39 mm × 218 mm
39 mm × 218 mm
16 mm × 218 mm
16 mm × 258 mm
185 mm × 20 mm × 2 mm
Right 0° – 57°, Left 0° – 45°
Right 0° – 45°, Left 0° – 45°
Miter (Left) 0° – 45°, (Right) 0° – 45°
Miter (Right) 0° – 45°, (Left) 0° – 31°
36 V
4000 min
–1
830 mm × 780 mm × 484 mm
Multi volt battery
15.4 kg
Po<0.4 mW Class 1M Laser Product
650 nm
Laser Diode