Allen-Bradley 931S-V1R1D-MC1R Notice D'utilisation page 3

1. General notes
WARNING WARNING WARNING WARNING
• Disconnect power prior to installation
• Installation only by Qualified personnel
• Follow all applicable local and national electrical codes
• Due to potential hazardous voltages in close proximity, use a non-
conductive tool and proper PPE when adjusting the potentiometers
on the front panel.
Please observe that applications with high insulation voltages require
sufficient space or insulation to adjoining devices, as well as protection
against accidental contact. Generally speaking, fer rules with plastic collars
are to be used.
Protective measures must be taken against electrostatic
discharges (ESD) when installing and setting the
931S-V1R1D-MC1R
1.1 Notes on EMC
Deviations may occur during disturbances caused by HF radia-
tion. It is possible to reduce these interferences by installing the
electrical equipment into a shielding enclosure, using shielded
cables or cable filters.
1