General Information; Explanation Of Symbols; Responsibility Of The Operator - Forch 5350 9011 Mode D'emploi

Micro Impact Wrench 1/2" 1.100 NM
ENG

1. General Information

■
Please make sure that the user of this tool has thoroughly read and understood the in-
struction manual, the instructions for use and these safety instructions before first use of this
device.
■ The operating manuals, the operation instructions, as well as the safety instructions provide
important information necessary for the safe and trouble-free operation of your FÖRCH-tool.
■ Correct use of the tool includes the full notice of all safety notes and information.
■ Therefore keep the corresponding operation manual, the operation instructions as well as
these safety instructions always with your FÖRCH-tool.
■ The pneumatic tools had been developed for specific use. FÖRCH expressly states that
these tools are not to be modified and/or used in a way that does not correspond to their
intended use.
■
For injuries and damages caused by improper use, use for purposes other than intended or
infringement of these safety instructions, FÖRCH accepts no liability nor warranty.
■
In addition, the rules applying for the tool's range of use with regard to accident prevention
regulations and general safety regulations have to be observed.

2. Explanation of symbols

ATTENTION: Give utmost attention to these symbols!
READ THE INSTRUCTIONS / NOTES!
The operator is obliged to read and comply with all operation information, operation
manuals and safety information and to instruct the users of this device accordingly.
NOTE!
This symbol indicates notes that help you with the handling of the device.
WARNING!
This symbol indicates important descriptions, dangerous conditions, safety hazards
or safety instructions.
ATTENTION!
This symbol indicates notes which, if not followed, might lead to damages,
malfunctions and/or complete failure of the device.
For your safety

2.1. Responsibility of the operator

■
At the time of its development and manufacturing the device is produced in accordance with
applicable recognized technical regulations and is regarded as safe to operate. Dangers may,
however, arise from the device when it is used improperly or not according to the intended
use, by non-professionally trained personnel. Any person who is authorized to work on or
with the device must therefore have read and understood the operation manuals, the operat-
ing instructions and the safety regulations before starting work..
■ The operation manuals, the operating instructions and the safety regulations are to be kept in
immediate vicinity of the device.
■ Changes of any kind, as well as attachments or modifications to the device are prohibited.