Numark PARTY MIX Guide D'utilisation page 6

Beat-Matching and Mixing with Party Mix and Serato DJ Lite
Below is an example of how to mix tracks using Party Mix and Serato DJ Lite:
1. Start with the Gain and EQ knobs at the 12 o'clock position.
You can adjust these after the tracks are loaded.
2. Turn the Browse knob to scroll through your music library.
3. Load tracks with similar BPM onto Decks 1 and 2 by pressing
the Load 1 and Load 2 buttons on Party Mix.
4. Move the crossfader on Party Mix all the way to the left to
send the audio from Deck 1 to the main outputs. If you are
listening through the headphone output, turn the Cue Mix knob
all the way to the right to PGM.
5. Play the track that is loaded on Deck 1.
6. Press the PFL/Cue button on Deck 2, and turn the Cue Mix
knob to the left toward CUE to preview the audio through the
headphone output.
7. Play the track that is loaded on Deck 2 to preview it in your
headphones. Press Sync on Deck 2 to match its BPM with
Deck 1.
8. While the track is playing, press the Cue button to return to the
beginning of the track.
9. Play the track that is loaded on Deck 2.
10. Move the crossfader on Party Mix toward the right to
crossfade from Deck 1 to Deck 2.
6