Using Usb Inputs - Grandin LC16M211 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using USB Inputs

USB Connection
You can connect a USB hard disk drive or USB
memory stick to your TV by using the USB inputs
of the TV. On feature allows you to play fi les stored
in a USB drive or record programmes.
2.5" and 3.5" inch (hdd with external power supply)
external hard disk drives are supported.
To record a programme, you should fi rst connect a
USB disk to your TV while the TV is switched off.
The you should then switch on the TV to enable the
recording feature. Otherwise, the recording feature
will not be available.
IMPORTANT !
You should back up your fi les before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any fi le damage or dataloss.
It is possible that certain types of USB devices (e.g.
MP3 Players) or USB hard disk drives/memory sticks
may not be compatible with this TV.
IMPORTANT: The TV supports only FAT32 disk
formatting. NTFS format is not supported. If you
connect a USB disk with NTFS format, the TV will ask
you to format the content. See the section, "Format
Disk" in the following pages for more information on
disk formatting.
Note that ALL the data stored on the USB disk will
be lost and then the disk will be formatted to FAT32
in such a case.
USB Disk Connection
• Plug your USB device to the USB input of the TV.
Note: Plug or unplug your USB disk while the TV is
switched off.
Note: If you are going to connect a USB hard disk drive
to the TV set, USB connection cable used between
the disk drive and the TV should have a USB logo
and should be as short as possible.
Note: While formatting a USB hard disk that has 1TB
(Tera Byte) or more fi le capacity, you can experience
problems with the formatting process. In such a
case, you should format the disk with your personal
computer and the formatted disk type should be
FAT32.
SIDE VIEW
USB
5Vdc
Max:500mA
01_woypbpr_[GB]_MB60_1900UK_PVR_BRONZE17_16911WLED_10072246_50184497.indd 9
01_woypbpr_[GB]_MB60_1900UK_PVR_BRONZE17_16911WLED_10072246_50184497.indd 9
USB MEMORY
English - 9 -
CAUTION !
Quickly plugging and unplugging USB devices, is a
very hazardous operation. Do not repeatedly quickly
plug and unplug the drive. This may cause physical
damage to the USB player and especially the USB
device itself.
Do not pull out USB module while playing or
recording a fi le.
Programme Recording
To record a programme, you should fi rst connect a
USB disk to your TV while the TV is switched off.
You should then switch on the TV to enable recording
feature.
IMPORTANT: When using a new USB hard disk drive,
it is recommended that you fi rst format the disk using
your TV's "Format Disk" option.
When using the recording function the connected
USB disk should have at least 1GB capacity
and should have 2.0 speed compatibility. If the
connected USB device does not support 2.0 speed
an error message will be displayed.
Recorded programmes are saved onto the connected
USB disk in .TS format (MPEG-2 transport stream).
These can only be viewed on this TV.
An hour of recording requires approximately 2GB
of space.
For more information on recording programmes,
see sections "Instant Recording", "Timeshifting",
"Electronic Programme Guide", "Recordings Library"
or "Recording Timers" in the following parts.
Recorded programmes are split into 1GB
(approximately an hour) partitions. Names of the
stored recordings' last three digits indicates this:
Such as 4801-000.ts , 4801-001.ts.
Recorded programmes are stored in the following
directory of the connected USB disk: \DVR\RECS.
All recordings are indicated with a number (such
as 4801-000.ts). A text (txt) fi le is created for each
recording. This text fi le includes information such as
broadcaster, programme, and recording time.
If the writing speed of the connected USB disk is
not suffi cient, recording may fail and the timeshifting
feature may not be available.
Recordings of HD programmes can occupy more
space on the USB disk depending on the broadcast's
resolution. For this reason it is recommended
to use USB hard disk drives for recording HD
programmes.
Do not unplug the USB/HDD while recording. This
may harm the connected USB/HDD.
Multipartition HDDs are supported until two
partitions.
08.02.2011 11:37:19
08.02.2011 11:37:19

Publicité

Table des Matières
loading

Table des Matières