Features - Ryobi R86447 Manuel D'utilisation

SYMBOLS
SERVICE
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to your nearest
AUTHORIZED SERVICE CENTER for repair. When servic-
ing, use only identical replacement parts.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses
with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked
to comply with ANSI Z87.1.
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemi-
cals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.

FEATURES

PRODUCT SPECIFICATIONS
Switch ..........................................................Variable Speed
Stroke Length ............................................................
kNOW YOUR RECIPROCATING SAW
See Figure 1, page 11.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BARREL-STYLE GRIP
The barrel-style grip of this saw is designed for one-handed
use only.
LOCk-OFF BUTTON
Your saw is equipped with a lock-off button which reduces
the possibility of accidental starting. The lock-off button is
located on the handle above the switch trigger. You can de-
press the lock-off button from either the left or right side.
SAVE THESE INSTRUCTIONS
1/2 in.
6 — English
WARNING:
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator's manual.
If you do not understand the warnings and
instructions in the operator's manual, do not use
this product. Call RIDGID
assistance.
No Load Speed ............................................ 0-3,500 (SPM)
Motor .................................................................. 18 Volt DC
LED LIGHT
The LED light, located on the front of the tool, illuminates
when the switch trigger is depressed. This provides extra
light for increased visibility.
TOOLLESS BLADE CLAMP
Your saw has a blade clamp design that does not require
the use of a tool (blade wrench) when installing or removing
the blade.
VARIABLE SPEED SWITCH TRIGGER
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.
customer service for
®