Putting The Player Together; Connecting To The Phono Terminals And Ac In Terminal - Technics SL-1200GR Manuel D'utilisation

Putting the player together

Connecting to the PHONO terminals and AC IN terminal

Make connection to the PHONO terminals and AC IN terminal before setting up or installing
the player.
1
Take out the player from the
package, attach the "FRONT
styrofoam" and place the player
with its front side down so that
you can make connection to the
PHONO terminals and AC IN
terminal on the back side.
Attention
Be careful not to tip over the player.
2
Connect the PHONO cable, PHONO earth
lead and AC power supply cord.
1
Attach the "FRONT styrofoam" and
place the player with its front side down.
12
(12)
English
2
Connect the supplied PHONO
cable, PHONO earth lead, and
AC power supply cord.
Insert the AC power supply cord
up to a point just before the
round hole.
Connecting the PHONO earth lead to
the player and amplifier.
 
T urn the terminal to the left to loosen.
k
Insert the earth lug and tighten the
terminal securely.
(Red)
(White)
(Black)