Bronpi KIT-2 Instructions D'installation, D'utilisation Et D'entretien page 19

COMPONENTS
Switchboard HID FIRE
Sensor and Card IOC-S
Exchanger
Circulator c2
Valve Diverter
Circulator c1
Electronic regulator IOC-S with HID FIRE BASIC
The electronic regulator IOC-S and the switchboard HID FIRE BASIC are preset with all parameters for the
performance of a hydraulic system.
Regulator IOC-S
SET
ON
It is the control card and where all control and managed devices are connected as shown in chapter
"Connecting Schema". This card is installed inside a stagnant box of 6 modules DIN.
When the working parameters are memorised, it will work in an independent way, remarking any anomaly
with the activation of a red led placed between the flow and sensor connections and it is not necessary that
the HID FIRE BASIC switchboard is connected.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS 20 KIT-2