Installing With Support En - Abicor Binzel BRS-LCi Mode D'emploi

BRS-LCi
ø
8
mm
1 2 cylinder bolts
2 Clamping device
3 Cleaning station
Abb. 4 Putting into operation
6.1 Installing with support
 Abb. 4 Putting into operation on page EN-11
1 Fasten the support (8) on a vibration-free working surface in the work area of the robot by means of four
screws (7).
2 Position cleaning station (3) with two cylindrical pins (1) on the support (8) and fix it with four screws (4).
3 Fasten collecting tray (5) to the support (8) by means of two screws (9).
BAL.0149.0 • 2017-05-17
4 4 screws M8
5 Collecting tray
6 Bottle holder
1
4
9
8
7
7 4 screws
8 Support
9 2 screws
6 Putting into operation
2 3
1
1
4
5
6
7
EN - 11