Venting System - ICON AIRFLAME PRO Assemblage, Entretien Et Manuel De L'utilisateur

VENTING SYSTEM

Ventilation is a premier aspect of the Airframe Pro, with a total of nine intake vents and five exhaust vents. The forehead vents
are angled to provide linear venting at speed. A deep-channel EPS liner enhances this feature by routing air more effectively.
The chin vent is designed for an aggressive riding position, providing intake at the attack angle. The low-pressure exhaust
vents round out the venting package.
The Airframe Pro uses four simple switches to manage airflow to the interior of the helmet. The forehead vent (1a, 1b) is opened
by pressing upward on the grooved piece. To close, simply press down on the raised element. Similarly, the two side vents (2a,
2b) open by pressing back on the grooved area, and close by pressing the vent cover forward. To open the chin/shield vent (3a,
3b), press in on the raised area. It closes by simply pressing up and in on the grooved area.
COOL AIR IN
1a
UP TO OPEN
2b
FORWARD TO CLOSE
1b
DOWN TO CLOSE
3a
DOWN TO OPEN
WARM AIR OUT
2a
BACK TO OPEN
3b
UP TO CLOSE
6