ICON AIRFLAME PRO Assemblage, Entretien Et Manuel De L'utilisateur page 6

INTERIOR
The Airframe Pro features a fully modular interior; lined with Icon's® exclusive
moisture wicking material, HydraDry™.
The size of a helmet is based on a combination of three factors: outer shell size,
inner EPS size, and interior component thickness. The comfort of the helmet can
be customized by replacing your existing cheek-pads with thinner cheek-pads (for
a looser fit) or thicker cheek-pads (for a tighter fit). To order replacement interior
components visit your local dealer or www.rideicon.com.
HELMET SIZE
SIDE LINER
COMFORT LINER REMOVAL
How to remove your interior for cleaning or replacement:
1. Release each cheekpad from the helmet by pulling inward, freeing it from the attachment system.
2. Flip your helmet over and pull on the cheekpad. Note how the cheekpad plate slips between the helmet shell
and EPS liner for reassembly.
3. Remove your comfort liner by releasing it from the two-snap system on the back of the helmet. Then remove
the comfort liner attachment point, taking note of how the comfort liner attachment slips into place between
HELMET SHELL SIZE
the shell and EPS liner. Remove the side-liner pieces by pulling inward, freeing them from their attachment
points.
5
HELMET SHELL SIZE
2XS XS S M L
25 25 20 25 25
mm mm mm mm mm
15 15 10 15 18
mm mm mm mm mm
18 18 12 18 20
1
mm mm mm mm mm
4
1
XXS XS
35 30
mm mm
15 12
mm mm
XXS XS
XL 2XL 3XL
35 30
30 25 20
mm mm
mm mm mm
15 12
18 15 10
mm mm
mm mm mm
20 15 10
2
mm mm mm
E E 5
S M L XL
30 25 30 25
mm mm mm mm
15 12 12
mm mm mm mm
S M L XL
30 25 30 25
mm mm mm mm
15 12 12 9
mm mm mm mm
3 3
6
XXL 3XL
20 20
mm mm
9 7 7
mm mm
XXL 3XL
20 20
mm mm
7 7
mm mm
2