ICON AIRFLAME PRO Assemblage, Entretien Et Manuel De L'utilisateur page 2

AIRFRAME PRO HELMET
OWNERS INSTRUCTION MANUAL
The instructions in this manual are designed to help you select the right helmet, wear it properly, take care of it and know when
to replace it. Failure to follow these instructions may increase your risk of serious injury or death in an accident.
In order to get the most protection possible from your helmet, you should always do the following – Wear your helmet when
you ride, Handle your helmet carefully to avoid accidental damage and Ride safe. Do not take risks because you are wearing
a helmet.
WAIVER AND RELEASE BY OWNER
No personal protective equipment is able to safeguard against all injuries in the event of an accident or fall from a motorcycle.
No personal protective equipment can offer complete protection against impact or abrasion as a result of an accident or fall
from a motorcycle. Motorcycling is inherently dangerous in nature and use of this helmet cannot prevent injury or death. Even a
low speed accident may result in serious injury or death. When using this helmet, the user assumes all risk associated with this
activity, which may cause injury or death. The user hereby waives all claims against Icon® Motosports, Lemans Corporation
and J-TECH Corp. for death or injury to his or her person and hereby covenants to not sue for any claims arising as a result of
injury or death while using Icon Motosports products.
ANGLE OF ATTACK
The modern riding position - higher rear sets, lower clip-ons - has dramatically altered how a rider interacts with the modern
hypersport motorcycle. Compressed into an ever more compact shape, the rider's head positioning requires increased angle to
maintain visibility and stability. With this in mind, Icon® designed the AIRFRAME PRO.
Concentrating on this singular design focus allowed us to realize opportunities to decrease drag and weight by sculpting the
traditional neckline to avoid jacket or suit interference. Its aggressive geometry increases the line of sight while improving
aerodynamic attitude in a fully-tucked riding posture.
The dramatically reduced shell profile, comprised of aerospace-grade carbon fiber or FRP, features a track-recognized ECE
certification. Precision assembly techniques further this dedication to mass reduction, allowing Icon® to craft a helmet that is
exceptionally light and peerlessly outfitted.
Internally, the traditional three-piece liner has been upgraded to a five-piece liner, providing a greater amount of fitment
combinations for each unique head shape. Crown, lateral, fore and aft padding components allow for a possibility of 27 fitment
combinations in a single shell, double that of the AIRFRAME PRO's competitors.
Both internally and externally, the Icon® AIRFRAME PRO is optimized for the Angle of Attack.
REPLACEMENT RECOMMENDATION
The five-year helmet replacement recommendation is based on a consensus of the majority of helmet manufacturers. Glues,
resins and other materials used in helmet production can affect liner materials over time. Hair oils, body fluids and cosmetics,
as well as normal "wear and tear" also contribute to helmet liner degradation.
Additionally, petroleum-based products present in cleaners, paints, fuels, and other commonly encountered materials may
break down materials used in the construction of many helmets, possibly compromising performance. Experience indicates
that helmet standards are revised every five years. This, coupled with advances in materials, designs and production methods
suggest that it is in the rider's best interest to replace his/her helmet every five years at a minimum.
SAFETY WARNING
Riding a motorcycle is a dangerous activity. No helmet can protect a wearer against all possible impacts. When riding, always
wear a helmet, eye protection, protective clothing, gloves and boots. There is no assurance that serious injury or death can be
avoided even if you wear the helmet shown in this manual. Take all precautions to avoid every risk when riding a motorcycle. This
helmet is not meant for use as a fire retardant product and does not contain any fire retardant materials. Please ensure that your
Icon® products fit properly. Improperly fitting products can impair your ability to control your motorcycle.
1