Hilti TE 60 Mode D'emploi page 22

Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The working environment may be as follows: construction site, workshop, renovation, conversion or new
construction.
The power tool may be used only in a dry environment.
Take the influences of the surrounding area into account. Do not use the power tool where there is a risk of
fire or explosion.
The power tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type identification plate.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Modification of the power tool or tampering with its parts is not permissible.
2.2 Chuck
TE Y (SDS-max) quick-change "click" chuck (TE 60 / TE 60 ATC)
TE T (SDS-top) quick-change "click" chuck (TE 60T / TE 60T ATC)
2.3 Switches
Speed-control switch for smooth hole-starting / chiseling
Function selector switch: Hammer drilling, rotary-only drilling, chiseling, chisel blade position (24-way
adjustment)
Choice of full or reduced (50%) power
Control switch lockable for chiseling
2.4 Grips
Vibration-absorbing, pivotable side handle
Vibration-absorbing grip
2.5 Protective devices
Mechanical safety clutch
Electronic restart interlock to prevent the power tool starting unintentionally after an interruption in the electric
supply (see section "Troubleshooting").
ATC Active Torque Control (TE 60 ATC / TE 60T ATC)
2.6 Lubrication
Gearing and hammering mechanism with separate lubrication chambers
2.7 Active Vibration Reduction
The power tool is equipped with an AVR Active Vibration Reduction system which reduces vibration significantly
compared to power tools without AVR.
2.8 TPS Theft Protection System (optional)
The power tool may be equipped with the TPS Theft Protection System as an option. If the power tool
is equipped with this feature, it can be unlocked and made ready for operation only through use of the
corresponding TPS key.
2.9 LED indicators
Service indicator LED (see section "Care and maintenance / service indicator")
Theft protection system indicator (optional) (see section "Operation / TPS theft protection system (optional)")
Printed: 27.05.2013 | Doc-Nr: PUB / 5071058 / 000 / 00
en
19