Eec Conformity Explanation - Bresser BioScience Mode D'emploi

light enter the view field. If the light spot is of fset from the
center of view , loose the scr ew (2) slightly and move the
lamp base (5). Move the lamp spot into the center
tighten up the screw (2) immediately.
V. MAINTENANCE
1. Sweep the lens
Sweep the lens by lens tissue or soft fabric immersed with
a mixed liquid of alcohol/ether. Clean the 100x oil objective
from oil whenever you finish operating.
2. Clean the painted parts
The dust on the painted parts can be r emoved by gauze.
For the gr ease spots, the gauze immersed slightly with
aviation gasoline is r ecommended. Do not use or
solvents such as alcohol, ether or other thinner etc. for
cleaning the painted parts or plastic components.
3. Avoid disassembling the microscope
Because of being a precise instrument, do not disassemble
the microscope casually. That may cause serious damage
to its performance.
4. Being not used
Cover the micr oscope with the dust cover (made of
polymethylmethacrylate or polyethylene) and place it there,
where it is dry and mouldless. We suggest the storage of all
objectives and eyepieces in a closed container with drying
agent.

EEC CONFORMITY EXPLANATION

Meade Instruments Europe GmbH & Co KG, resident in 46414
Rhede/Westf., Gutenber gstr. 2, Germany , explains the
agreement with in the following specified EEC guidelines for
this product:
EN 61326: 1997+A1: 1998+A2: 2001+A3: 2003,
EN 55022, EN 61000-3-2/-3, EN 61000-4-2/-3/-4/-5/-6/-11
Transmission-type Microscope
Product description:
BioScience
Model: BRESSER
Rhede, July 20, 2007
Meade Instruments Europe GmbH & Co. KG
Helmut Ebbert
Managing director
GAUARANTEE
, then
The period of gaurantee is 2 years, beginning on the day of
purchase. Please keep the cash r
purchase. Devices which become defective during the
gaurantee period can be r eturned to the dealer wher e the
device was bought. The repaired device or a new one will then
be returned to you. In the case of defects which occur after
the end of the gaurantee period, the devices can also be
returned. However, repairs which become necessary after the
end of the gaurantee period will be subject to a service fee.
Important:
Make sure to return the device carefully packed in the original
ganic
packaging in order to prevent transport damage. Please also
enclose the cash receipt (or a copy). This gaurantee does not
imply any restriction of your statutory rights.
Your dealer:
Name: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Postcode / City: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Street: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Telephone: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Date of purchase: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Signature: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11
eceipt as evidence of