Vermeiren Illico Manuel D'installation page 19

[13]
•
Take the left or right side-rail and hold it
next to the frame of the mattress support.
Make sure that the canted corner is
located on the headboard-side.
•
Press and hold red lever (26), while
inserting the shaft of the side rail in block
(39) (rotation point).
•
When both shafts are inserted, check the
locking of the side rail by pushing and
pulling the side rail.
•
Repeat this for the second side rail.
[15]
CAUTION
Before operating the handset, make sure
that cables won't get crushed by moving
parts.
•
Check the operation of the bed by using
the handset, see instruction manual of
the bed.
39
26
Risk of damage
Installation manual
- 15 -
Assembly and disassembly
[14]
Finally, make sure that all assembled
parts are locked in place.
A
B
[16]
•
Release the brakes of the castor wheels
(position A).
•
Move the bed in place according to the
description in the instruction manual.
•
Apply the brakes (position B).
The bed is now ready for use.
EN
Illico
NL
2018-07
PL
CS