Setting The Temperature; Switching The Appliance On; Special Functions; Sabbath Mode - Thermador T24UC920DS Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour T24UC920DS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

maker.
L.
FILTER RESET
When the LED indicator is illuminated, press and
hold the FILTER button for 3 seconds to reset the filter
hour counter. See W ater Filter on pg. 12.

Setting the temperature

By default, the temperature set in your Refrigerator is:
37°F (3°C) for both drawers' compartments. Both
drawers share the same temperature.
You can adjust the temperature to your liking using the
SELECTION BUTTONS or the PRESET BUTTONS.
To set a new temperature press the SELECTION
BUTTONS: (-) or (+).
The temperature will increase or decrease by one
degree every time the SELECTION BUTTON is
pressed.
The temperature can be displayed in degrees
Celsius (°C) or degrees Fahrenheit (°F). The
factory setting is degrees Fahrenheit (°F).

Switching the appliance on

The appliance begins to cool when plugged in.
WARNING:
Follow the instructions and recommendations in the
"Connecting the appliance" section in the
Installation Guide for a correct and safe use of
your Double Drawer Refrigerator.
• The interior drawer light(s) turn on when either
drawer is opened.
• The exterior TOUCH CONTROL lights and
buttons are non-functional when the upper-drawer is
closed.
The unit is preset to the following factory
recommended temperature settings: 37°F (3°C)

Special functions

The following special functions can be selected or
displayed:

Sabbath Mode

The Sabbath Mode is designed for those users whose
religious observances requires the turning off of lights
or for travelers who will be absent from home.
This appliance is certified by Star-K to meet strict
religious regulations in conjunction with specific
instructions found on
www.star-k.org
When Sabbath mode is activated:
• The display panel will indicate the unit is in
Sabbath mode.
• All other interior and exterior lights deactivate
and cannot be engaged.
Page | 8
• All control buttons become inactive.
• All audible and visual alarms become inactive.
Activating:
1.Pull out the top drawer.
2.Press and hold the QUICK CHILL and FRIDGE buttons
simultaneously for 3 seconds to engage the Sabbath mode.
The temperature settings used prior to engaging the
Sabbath mode are maintained.
3.The key-press sounds once, and the display panel
will change to continuously display the
following characters:
The display will not change, even if the drawer is closed,
as long as the unit remains in Sabbath mode.
NOTE: The Sabbath mode will remain active if the unit is
restarted after a power loss.
4. Unit will stay in SAB until deactivated.
Deactivating:
1. Press and hold the QUICK CHILL and FRIDGE
buttons simultaneously for 3 seconds.
2. All buttons, displays, lights and alarms will again
become functional.

Off Mode

Off mode deactivates all functional elements of the unit.
Activating:
1. Press and hold the QUICK CHILL and CELLAR
buttons simultaneously for 3 seconds to engage the OFF
mode.
2. The key-press sounds once and the display panel
will change to continuously display the following
characters:
Deactivating:
1. Press and hold the QUICK CHILL and
CELLAR buttons simultaneously for 3 seconds.
2. All functional elements of the unit will revert to where
they were set prior to engaging the OFF mode.

Fahrenheit / Celsius Display

1. Press and hold the QUICK CHILL and
Refrigerator Temperature Control (-) buttons
simultaneously for 3 seconds in order to switch between
degrees Fahrenheit (°F ) and degrees Celsius (°C) for
.
the temperature control and display.
2. The factory setting is degrees Fahrenheit. When
switching to degrees Celsius (°C), the display panel will
show the following characters for a few seconds, and the
key press will sound once:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

T24uc910dsT24uc900dp

Table des Matières