List Of Materials; Parts Supplied; Parts Not Supplied; Optional Accessories - Elica EST627SS Guide D'utilisation, D'entretien Et D'installation

List of Materials

Parts supplied

Removing the packaging
CAUTION!
Remove carton carefully, Wear gloves to protect against
sharp edges.
WARNING!
Remove the protective film covering the product before
putting into operation.
• Integral blower housing
• Integral blower
• Grease filters supporting frame
• Filter trim bracket (33" model only)
• Transition
• Lamp already installed
• Grease filters
• Hardware bag with:
• Use, care and installation guide
• 8 Wood screws
• 4 Assembly screws (for Transition)
• 2 assembly screws (for integral blower spring clip)
• 6 assembly screws (for grease filters supporting
frame)
• 1 spring clip (for integral blower installation)
• 2 machine screws (for integral blower installation)
• 2 knobs for filter trim bracket (33" model only)

Parts not supplied

Optional Accessories

• Hood liner

Tools/Materials required

• Wire nuts
• 10" rounded metal duct length to suit installation
• Measuring tape
• Pliers
• Gloves
• Knife
• Safety glasses
• Strain relief
• Spirit level
• Duct tape
• Screwdrivers:
Phillips (Posidrive) # 2
Torx # 2
• Wire cutter/stripper
• Masking tape
• Saw, jig saw or reciprocating saw
5