Product Description And Specifications; Technical Data; Noise/Vibration Information - Bosch PMF 10,8 LI Notice Originale

OBJ_BUCH-1170-006.book Page 15 Wednesday, October 12, 2016 11:17 AM
 Exercise extreme caution when handling the scraper.
The accessory is very sharp; danger of injury.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for sawing and cutting wooden mate-
rials, plastic, gypsum, non-ferrous metals and fastening ele-
ments (e. g., unhardened nails, staples). It is also suitable for
working soft wall tiles, as well as for dry sanding and scraping
of small surfaces. It is especially suitable for working close to
edges and for flush cutting. Operate the power tool exclusive-
ly with Bosch accessories.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Battery unlocking button
2 Battery pack*
3 Thumbwheel for orbit frequency preselection
4 Battery charge-control indicator
5 On/Off switch
6 Venting slots
7 Tool holder
8 Handle (insulated gripping surface)
9 Plunge saw blade*
10 Clamping bolt with washer
11 Hex key
12 Sanding plate*
13 Sanding sheet*
14 Segment saw blade*
15 Felt ring of the dust extraction*
16 Retaining clip of the dust extraction*
17 Vacuum connection*
18 Dust extraction*
19 Vacuum hose*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Bosch Power Tools

Technical Data

Multi-function tool
Article number
Preselection of orbital stroke rate
Rated voltage
No-load speed n min
0
Oscillation angle, left/right
Weight according to EPTA-
Procedure 01:2014
Permitted ambient temperature
– during charging
*
– during operation and during
storage
Recommended batteries
Recommended chargers
* Limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-4.
Typically the A-weighted noise levels of the product are:
Sound pressure level 81 dB(A); Sound power level 92 dB(A).
Uncertainty K =1.8 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2 2
Sanding: a =4 m/s , K=1.5 m/s
h
Cutting with plunge cut saw blade: a =20 m/s
h
Cutting with segmental saw blade: a =16 m/s
h
2 2
Scraping: a =6 m/s , K=1.5 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
1 609 92A 1ZZ | (12.10.16)
English | 15
PMF 10,8 LI
3 603 A01 9..

V= 10.8
-1
5000–20000
° 1.4
kg 0.93
°C 0...+45
°C –20...+50
PBA 10,8 V ...
AL 11.. CV
2 2
, K=2.0 m/s
2 2
, K=2.5 m/s