Cleaning And Maintenance; Guarantee Terms - Bestron DFT430 Mode D'emploi

Ventilateur tour design
Masquer les pouces Voir aussi pour DFT430:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
user's instructions
operATIon - Ventilation
S et the switch to position 'OFF' before connecting the plug to the wall socket; this will make sure that
the appliance does not start immediately.
1 . P lace the fan on a stable surface and ensure that the grilles for the supply and removal of the air are
unobstructed.
2. T he device has a speed switch with 8 positions (see Figure 3). Select the desired function (see table)
using the switch.
MArkInG
OFF
LOW
MID
HIGH
LOW
MID
HIGH

cleAnInG AnD MAInTenAnce

From time to time dust can accumulate in the fan housing, and on the fan blades. Remove the dust with a
brush and/or vacuum cleaner.
• Verify that the appliance is not connected to the power supply before you clean it.
Make sure no moisture gets into the appliance.
N ever use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
THe enVIronMenT
D ispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
W hen this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to
the symbols on the product, the user's instructions or the packaging.
T he materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
C ontact your municipality for the address of the appropriate collection point in your neighbourhood.

GuArAnTee TerMs

The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. N o charges will be made for labour costs or materials during the warranty period. Any repairs carried
out during the warranty period do not extend the warranty period.
2. T he importer automatically becomes the owner of any faulty parts that he replaces or a faulty
Figure 3 Control switch
FuncTIon
Power off
Low speed
Medium speed
High speed
Low speed and Oscillation
Medium speed and Oscillation
High speed and Oscillation
17

Publicité

Table des Matières
loading

Table des Matières