EN
2 / INSTALLING YOUR APPLIANCE
• ELECTRICAL CONNECTIONS
During
installation
operations,
the
appliance
unplugged from the electrical grid; fuses
must be cut off or removed.
The electrical connections are made before
the appliance is installed in its housing.
Ensure that:
— the electrical installation has suffi cient
voltage,
— the
electrical
wires
condition,
— the diameter of the wires complies with
the installation requirements.
Warning
This appliance is delivered with a H 05
VVF power cord that has three- 0.75 mm
conductors (neutral, phase and ground).
It must be connected to the main power
supply (which should be a 220-240 V single
phase current) via a CEI 60083 standardised
socket that should remain accessible after
installation, in keeping with installation
guidelines.
We cannot be held responsible for any
accident resulting from an inexistent,
defective or incorrect ground lead. The fuse
for your installation must be 10 or 16A. If
the power cable is damaged, call the after-
sales service department in order to avoid
danger.
Warning
If the electrical installation at your
residence requires any changes in order
to hook up your appliance, call upon a
professional electrician.
Warning
If the hood displays any malfunctions,
unplug the appliance or remove the fuse
corresponding to the electrical socket
where your appliance is plugged in.
and
maintenance
must
be
are
in
good
2
35