In the case of the sucking version, connect the
flange of the cooker hood to the air outlet hole,
which is already prepared, through a suitable
pipe. Position the two chimneys on the coo-
ker hood in their proper seat, raising the upper
chimney to the desired height and fix the appro-
priate bearings using the included screws and
reinforcements.
O PE R AT I N G PR O C E DU RES
WORKING
The functions of the keys of the Touch Con-
trol keypad (push button control panel) are
described below:
A: LIGHT SWITCH ON/OFF
B: SPEED REDUCTION / OFF MOTOR
C: SPEED INDICATORS
D: ON MOTOR / SPEED INCREASE
E: TIMER 10 min.
After having fixed the hood-bearing stirrup of
the upper chimney, raise and block it with the
two side screws.
For the Touch Control "ROSSO" (RED) ver-
sion, it is possible to set the shut off of the
lighting function of the keypad by pressing
the light key (A) for 6 seconds (this opera-
tion must be done with both lights and motor
switched off). This function permits for the au-
tomatic shutoff of the keypad after 10 secon-
ds from shutoff of the lights and the motor. To
re-activate the keypad it is sufficient to set a
function. To keep the lighting of the keypad
always on, press the light key for 6 seconds
(this operation must be done with both light
and motor switched off).
9