Programming The Timer - Dometic MWO240 Notice D'utilisation

MWO240
!
WARNING! Risk of burns from heated food!
Use suitable potholders to remove heated food from the microwave
oven.
I
NOTE
The specified automatic cooking programs are based on guidelines.
The actual cooking time required depends on the temperature, type
and weight of the food. You can adjust the microwave power and cook-
ing time in several stages to suit your needs (see chapter "Setting the
multi-stage cooking program" on page 15).
➤ Open the door and remove the heated food.
I
NOTE
The signal tone is repeated every three minutes until you open the door.
7.7 Setting the multi-stage cooking program
You can adjust the microwave power and cooking time in up to 4 stages to meet your
needs.
Example of a 2-stage cooking program: You would like to cook a dish at 100P for
3 minutes, then at 20P for 9 minutes.
➤ Place the food in the microwave oven and close the door.
➤ If necessary, press the
power of 100P is selected.
➤ Press the + or – buttons to set the cooking time to 3:00.
➤ If necessary, press the
power of 20P is selected.
➤ Press the + or – buttons to set the cooking time to 9:00.
➤ Press the INSTANT/START button.
7.8

Programming the timer

The timer function allows you to set a preferred time to start microwave operation.
An example of setting the timer function: It's 12:30 pm. At 2:30 pm, you would like
to cook a dish at 100P for 3 minutes.
➤ Place the food in the microwave oven and close the door.
EN
button repeatedly until the required microwave
POWER
button repeatedly until the required microwave
POWER
Operating the microwave oven
15