Installation Instructions - HEIDENHAIN ND 5023 Guide D'installation

1.4 Storage and distribution of the
documentation
The instructions must be kept in the immediate vicinity of
the workplace and must be available to all personnel at all
times. The operating company must inform the personnel
where these instructions are kept. If the instructions have
become illegible, the operating company must obtain a
replacement from the manufacturer.
If the product is given or resold to any other party, the
following documents must be passed on to the new
owner:
Addendum, if supplied

Installation Instructions

Operating Instructions
1.5 Target group for the instructions
The Installation Instructions must be read and observed by
every person who performs any of the following tasks:
Mounting
Installation
1.6 Notes in this documentation
Safety precautions
Comply with all safety precautions indicated in these
instructions and in your machine tool builder's
documentation!
Precautionary statements warn of hazards in handling the
product and provide information on their prevention.
Precautionary statements are classified by hazard severity
and divided into the following groups:
DANGER
Danger indicates hazards for persons. If you do not
follow the avoidance instructions, the hazard will
in death or severe injury.
WARNING
Warning indicates hazards for persons. If you do not
follow the avoidance instructions, the hazard
result in death or serious injury.
CAUTION
Caution indicates hazards for persons. If you do not
follow the avoidance instructions, the hazard
result in minor or moderate injury.
NOTICE
Notice indicates danger to material or data. If you do
not follow the avoidance instructions, the hazard
result in things other than personal injury, like
property damage.
6
Informational notes
Observe the informational notes provided in these
instructions to ensure reliable and efficient operation of the
product.
In these instructions, you will find the following
informational notes:
The information symbol indicates a tip.
A tip provides important additional or
supplementary information.
The gear symbol indicates that the function
described
The book symbol represents a
to external documentation, e.g. the
documentation of your machine tool builder or
other supplier.
result
could
could
could
depends on the machine,
Your machine must feature a certain
software or hardware option
The behavior of the function depends on
the configurable machine settings
HEIDENHAIN | ND 5023 | Installation Instructions | 09/2018
e.g.
cross reference