Declaration Of Conformity; Extent Of Delivery; Characteristics Noise Values; Operating Times - ATIKA BWS 500 Notice Originale
Masquer les pouces
Voir aussi pour BWS 500:
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Do not operate machine before having read the
operating instructions, understood all the notes and
assembly the machine as described here.
Keep the instructions in a safe place for future use.
Contents
-
-
-
EC Declaration of Conformity
according to EC directive 2006/42/EC
We,
ATIKA GmbH & Co. KG
Schinkelstraße 97
59227 Ahlen - Germany
herewith declare under our sole responsibility that the product
Log saw BWS 500
is conform with the above mentioned EC directives as well as with the
provisions of the guidelines below:
2004/108/EC and 2006/95/EC
Following harmonized standards have been applied:
EN 60204-1:2006; EN 1870-6:2002+A1:2009; EN 55014-1:2006;
EN 55014-2:1997+A1; EN 61000-3-2:2006: EN 61000-3-11:2000
EC type examination carried out by :
TÜV Rheinland Product Safety GmbH
Keeping of technical documents at:
ATIKA GmbH & Co. KG - Technical department - Schinkelstr. 97
59227 Ahlen - Germany
Ahlen, 08.12.2009
9
A. Pollmeier, management
Extent of delivery
•
•
•
1 Leg frame
•
3 Braces
•
1 Jigging device
•
1 Handle
•
1 Length stop
9
9
After unpacking, check the contents of the box
9
That it is complete
9
Check for possible transport damage
9
Report any damage or missing items to your dealer, supplier or the
10
manufacturer immediately. Complaints made at a later date will not be
10
acknowledged.
10
10
Characteristics noise values
11
12
DIN EN ISO 3746 / DIN EN ISO 11202 / ISO 7960 Appendix A
12
Use of the machine as log saw for firewood with standard saw blade.
12
Noise power level
13
No-load
L
= 109 dB(A)
13
WA
13
Load
L
= 110 dB(A)
WA
13
The factor of measurement uncertainty is 4 dB.
14
The values given are emission values and must therefore not simultaneously
14
represent safe workplace values too. Although there is a relationship between
14
emission and immersion levels, it can be reliably deduced whether additional
precautionary measures are necessary or not. Factors, which can influence the
14
immersion level currently existing at the workplace include the duration of the
14
effects, the special type of the workroom, other noise sources, etc. e.g. the
15
number of machines and other adjacent processes. The permissible workplace
values can also vary from country to country. This information should however
enable an improved assessment of the danger and risk to be carried out.
Operating times
Before initiating the device please observe the provisions pertaining to
corresponding laws (regional provisions) for the noise control.
Symbols machine
Carefully read opera-
tor's manual and the
safety instructions be-
fore
machine and observe
the instructions when
operating.
Risk of injuries of fin-
gers and hands by the
saw blade.
Wear eye and ear
protection!
Warning of hot surfaces. Danger of burning!
Do not touch hot engine parts.
Electrical devices do not go into the domestic rubbish. Give
devices, accessories and packaging to an eco-friendly
recycling.
According to the European Directive 2002/96/EC on electrical
and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a
facility for an environmentally compatible recycling.
1 Saw blade cover with
•
safety guard
•
1 Support extension
•
1 Saw blade cover
•
2 Wheels
•
Assembling tools
•
Operating manual
Sound pressure level at the workplace
L
= 97 dB(A)
pA
L
= 98 dB(A)
pA
Shut off engine and
remove
before
starting
the
cleaning, maintenance
or repair work.
Wear protective gloves!
Wear safety shoes!
power
cord
performing
Publicité
Chapitres
Table des Matières
