Din En Iso 3746:2010; Lwa; Wa = 115 Db(A); Lpa = 96 Db(A) - ATIKA BWS 500-2 Notice Originale
Masquer les pouces
Voir aussi pour BWS 500-2:
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Do not operate machine before having read the
operating instructions, understood all the notes and
assembly the machine as described here.
Keep the instructions in a safe place for future use.
Contents
EC Declaration of Conformity
No. (S-No.): 27785
according to Directive 2006/42/EC
Altrad Lescha Atika GmbH
Josef-Drexler-Str. 8, 89331 Burgau - Germany
declare under our sole responsibility, that the product
Brennholzwippkreissäge (Log saw) BWS 500-2
Serial number: 000001 - 020000
is conform with the above mentioned EC directives as well as with the
provisions of the guidelines below:
2004/108/EC and 2011/65/EU.
Following harmonized standards have been applied:
EN 1870-6:2017, DIN EN 60204-1:2016,
EN 61000-3-2:2014, EN 61000-3-3:2013,
EN 55014-1:2017, EN 55014-2:2015
Duly authorised person for the complilation of technical documents:
Altrad Lescha Atika GmbH - Technical department
Josef-Drexler-Str. 8 - 89331 Burgau - Germany
Burgau, 31.07.2020
i.A.
i.A. G. Koppenstein
Engineering design management
Extent of delivery
1
Log saw
2
Support extension
3
Axle
4
Wheels (2x)
11
5
Assembly tool M12
6
Srcew bag
11
7
Operating manual
11
8
Assembly and operating instruction sheet
12
Terms of guarantee
12
After unpacking, check the contents of the box
12
That it is complete
►
12
Check for possible transport damage
►
13
Report any damage or missing items to your dealer, supplier or the
11
manufacturer immediately. Complaints made at a later date will not be
14
acknowledged.
14
Packaging material can be recycled and should be brought to an eco-
14
friendly recycling facility.
15
15
Characteristics noise values
16
16
DIN EN ISO 3746:2010
16
Use of the machine as log saw for firewood with standard saw blade.
16
Noise power level Sound pressure level at the workplace
17
Load
L
= 115 dB(A)
WA
17
18
The factor of measurement uncertainty is 4 dB.
17
The values given are emission values and must therefore not simultaneously represent
18
safe workplace values too. Although there is a relationship between emission and
immersion levels, it can be reliably deduced whether additional precautionary measures
are necessary or not. Factors, which can influence the immersion level currently
existing at the workplace include the duration of the effects, the special type of the
workroom, other noise sources, etc. e.g. the number of machines and other adjacent
processes. The permissible workplace values can also vary from country to country.
This information should however enable an improved assessment of the danger and
risk to be carried out.
Operating times
Before initiating the device please observe the provisions pertaining to
corresponding laws (regional provisions) for the noise control.
Symbols operating instructions
Threatened hazard or hazardous situation. Not observing
this instruction can lead to injuries or cause damage to
property.
Important information on proper handling. Not observing
this instruction can lead to faults.
User information. This information helps you to use all the
functions optimally.
Assembly, operation and servicing. Here you are explained
exactly what to do.
Please refer to the attached assembly and
operating instruction sheet for references to
figure numbers in the text.
...
L
= 96 dB(A)
PA
11
Publicité
Chapitres
Table des Matières
