Temp Function - Qlima P 432 Manuel D'utilisation

LOCK
Pressing the + and - at the same time locks the remote control. Repeating this action
unlocks the buttons.
HEALTH FUNCTION
Press the HEALTH button to activate the health function.
With the Health function, cold plasma is generated. This achieves an effective sterilisati-
on so that bacteria are killed, odours are removed and the air is augmented with more
negatively-charged negative oxygen ions.

TEMP FUNCTION

Press the Temp button to choose between showing the set point or the area tempera-
ture on the air-conditioner's display.
PROGRAMMING THE TIMER WITH THE REMOTE CONTROL
Setting activation time.
1 Set the desired mode: cooling, drying or fan.
2 Switch the remote control off using the on/off button, after which only the tempe-
rature will be displayed.
3 Press the Timer button. The arrow below the T-on and the letter H will start to
flash.
4 Use the - and + button to set the required operating time.
5 Whilst the arrow below T-on and the letter H are flashing, point the remote con-
trol at the display on the air conditioner and then press the timer button again.
There will be an audible signal and the Timer LED on the air conditioner will light
up.
6 To switch off the timer function, press the on/off button with the remote control
pointed at the air conditioner. The Timer LED will go out. The timer function is
now deactivated.
Setting deactivation time
1 Set the desired mode: cooling, drying or fan.
2 Switch the remote control on with the on/off button.
3 Press the Timer button. The arrow below the T-off and the letter H will start to
flash.
4 Use the - and + button to set the required deactivation time.
5 Whilst the arrow below T-off and the letter H are flashing, point the remote con-
trol at the display on the air conditioner and then press the timer button again.
There will be an audible signal and the Timer LED on the air conditioner will light
up.
4
87