Product Description And Specifications - Bosch GHG Professional 16-50 Notice Originale

If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The heat gun is intended for deforming and welding plastic,
removing coats of paint and heating heat shrink plastic
tubes. It is also suitable for soldering and tinning, melting ad-
hesive bonding and thawing water pipes.
Technical Data
Heat gun
Article number
Rated power input
Airflow
Temperature at the nozzle outlet
Temperature measurement accuracy
Weight according to EPTA-Procedure 01:2014
Protection class
A) The amount of air increases when the temperature rises from 50 °C to 300 °C. The speed of the fan is identical at both power settings.
B) At an ambient temperature of 20 °C
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/vibration information
Typically, the A-weighted sound pressure level of the heat
gun is less than 70 dB(A).
Vibration total values a (triax vector sum) and uncertainty K:
h
2 2
a < 2.5 m/s , K = 1.5 m/s .
h
Operation
Starting operation
Creation of Smoke During Initial Use
A coating protects the metal surfaces from corrosion ex-
works. This protective layer evaporates during initial use.
The heat gun may display discolourations on the nozzle (3)
due to the production process. These do not count as dam-
age; the functioning of the heat gun is not affected.
Switching On
Slide the on/off switch (2) upwards.
Bosch Power Tools
B)
The heat gun is intended for handheld, supervised use.
Product Features
The numbering of the product features refers to the repres-
entation of the heat gun on the graphics page.
(1) Storage surface
(2) On/off switch and power settings
(3) Nozzle
(4) Heat shield, removable
a)
(5) Surface nozzle
a)
(6) Glass protection nozzle
a)
(7) Angle nozzle
a)
(8) Reflector nozzle
a)
(9) Reducing nozzle
a)
(10) Heat shrink plastic tube
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GHG 16-50
3 601 BA6 0..
W 1600
l/min 240/450
°C 300/500
±10 %
kg 0.52
Switching Off
Slide the on/off switch (2) downwards into the 0 position.
GHG 18-60: After working at high temperatures for a
u
prolonged period, let the power tool cool down by
briefly running it at the 50 °C (cooling stage) power
setting before switching it off.
Selecting the power setting (GHG 16-50)
You can choose between different power settings using the
on/off switch (2):
Setting Power set-
ting
Working stage 1
Working stage 2
Selecting the power setting (GHG 18-60)
You can choose between different power settings using the
on/off switch (2):
English | 7
GHG 18-60
3 601 BA6 1..
1800
A) A)
200 /350 /500
A) A)
50 /300 /600
±10 %
0.52
/Ⅱ /Ⅱ
GHG 16-50
°C l/min
300 240
500 450
1 609 92A 739 | (18.10.2021)