Rotex RKRTW Manuel D'utilisation page 36

5.3. Manually overriding a schedule
There are 2 ways of overriding a schedule:
A temporary override in locked schedule timer mode (
Temporarily choose the comfort or reduced setpoint by
pressing 1 button only:
move.
• comfort setpoint:
• reduced setpoint:
A temporary override of the setpoint in schedule timer
mode
+
Press or
Save a new, manual setpoint by pressing
seconds.
h
is displayed.
Locking and unlocking the schedule timer mode is performed by
=
pressing . The locked schedule timer mode displays as
The unlocked schedule timer mode displays as
By default the manual override is active until the next
NOTE
scheduled action. You can change this behavior by
means of user code
then only be active for 1 hour. Refer to "Setting up
codes in the user menu" on page 15.
Operation manual
11
<
q h
and are displayed.
w h
and
-
to modify the setpoint in steps of 0.5°C.
2® 03
>
or . The cursor "
are displayed.
=
B
: the manual override will
Room thermostat
S S S S
)
Y
" will
or by waiting 5
S
.
.
RKRTW
4PW50083-1