Getting Started - Rotex RKRTW Manuel D'utilisation

3. Getting started

3.1. Setting the clock and date
After installation you first need to set the clock before you can
actually use the thermostat.
1 Activate the advanced mode by pressing
seconds in OFF mode (
Refer also to "Description of the function modes and menus"
on page 7.
2 Navigate to the date and clock setting menu (
>
and then press
3 Set the hour, minutes, day of the week (
I
= Tuesday,...), day, month and year by pressing
-
and confirm each time by pressing
The value that you modify flashes.
3.2. Setting the desired mode: heating or cooling
This is only possible if cooling mode is available.
NOTE
<
1 Press to go to comfort mode (
<
2 Press
selection mode.
<
3 Press or
O P
or
=
4 Press to save your selection.
The thermostat returns to the schedule timer mode (
Operation manual
5
D
).
=
.
during 5 seconds to go to the heating/cooling
>
to switch to the desired mode.
is flashing.
>
G
) by pressing
&
=
.
A
).
Room thermostat
4PW50083-1
during 5
= Monday,
+
or
B
).
RKRTW