Led Status Indicators - Lindy 32397 Manuel Utilisateur

User Manual

LED Status Indicators

LED
LOCAL
LOCAL
REMOTE
REMOTE
LED
POWER
POWER
STATUS
REMOTE
Keyboard hotkey commands (Remote Receiver only)
Both consoles of the extender can have simultaneous access to the connected server or KVM
switch. Active keyboard and mouse access is governed by a short timeout period.
When you access from the local console at the Transmitter unit you can use operate your KVM
switch using its regular keyboard hotkeys. When you use the remote console you have two
additional hotkeys that allow you to switch between your workstation and remote KVM access:
You can switch console control at the Remote Receiver unit from PC port (connected
workstation) to RJ-45 port (the PC / KVM switch connected to the Local Transmitter) using this
simple hotkey command:
Scroll
+
Lock
When switching, the appropriate LOCAL and REMOTE LED will light on the Remote unit. You
will also hear an audible confirmation. You can enable and disable this audible beeper using
this hotkey command:
Scroll
+
Lock
Remote Receiver Unit
STATUS MEANING
RED The console is switched to the workstation
FLASHING The console is switched to the workstation, but the
RED PC is turned off or not connected.
The console is switched to the remote computer /
RED
KVM Switch
The console is switched to the remote computer /
SOLID KVM Switch but the computer(s) are not connected or
are switched off.
Local Transmitter Unit
STATUS MEANING
OFF No computer(s) connected to the Local Transmitter.
RED Computer(s) connected to the Local Transmitter.
FLASHING Flashes when there is local console keyboard/mouse
RED activity.
When there is no console keyboard/mouse activity
OFF
this LED remains off.
Scroll
+
C
Lock
Scroll
+
Q
Lock
= select 'PC Port' or 'RJ-45 Port (Remote KVM access)
= Beeper ON/OFF
5
English