S U B - Z E R O
W I N E S TO R AG E
L E D D I S P L AY
Electronic control system functions, such as
digital temperatures and service indicators, are
shown in the LED display, located on the
control panel. The temperatures of each zone
will be visible through the glass door of your
Wine Storage unit. If you are using your unit
frequently, the numbers may fluctuate.
U N I T O N / O F F
The
key pad on the control panel will shut
off all electrical power to the Wine Storage unit
for cleaning or service.
L I G H T S O N / O F F
All Wine Storage units have the capability of
having the lights on independently of the
door's opening and closing. This will allow you
to display your collection of wine for special
occasions.
To have the lights remain on independently of
the door's opening and closing, press the
key pad. Press the key pad again to have the
lights to go off when the door is closed.
You should not leave the lights on
overnight or for extremely long periods of
time. The heat from the lights will cause
the unit to work unnecessarily hard.
U S E & C A R E
A L A R M F E AT U R E
If the microprocessor detects temperature
fluctuations or a faulty component, you will
hear an audible beep and a bell symbol will
flash in the LED display on the control panel.
Also, if the unit is tied in with your home
security, it will alert this system. You can deac-
tivate the alarm feature and the audible sound
by depressing the
deactivated, the bell symbol will not be visible
in the LED display.
S A B B AT H M O D E ( S TA R - K )
All Wine Storage units feature the Sabbath
Mode. This is for certain religious observances
where the lights need to be turned off.
To initiate Sabbath Mode, while the unit is on
press the
the LED display on the control panel. Your unit
will be off.
Then press and hold the
seconds. This will turn the unit back on and
will disable the lights. To return the unit to
normal lighting, press and release the
pad.
If you have questions about Star-K compliance,
visit www.star-k.org.
V I S U A L S E R V I C E D I S P L AY
The electronic control system monitors
temperatures as well as the the unit's opera-
tion. If there is a temperature or operation
problem, you will notice the wrench icon illu-
minated in the LED display on the control
panel. Before calling for service, please check
to see if your condenser area needs cleaning.
Refer to Condenser Cleaning on page 16.
key pad. If the alarm is
key pad so that OFF is visible in
key pad for 10
key
9