Sub-Zero ICB424 Guide D'utilisation Et D'entretien page 11

S U B - Z E R O W I N E S TO R AG E
W I N E S T O R A G E
W I N E S T O R A G E S H E LV E S
All Sub-Zero Wine Storage models have roller-
assembly shelves with a full three-quarter
extension for easy access to all stored bottles.
IMPORTANT NOTE: Models ICB424 and
ICB424FS have roller-assembly shelves in all
instances with the exception of the bottom
stationary shelf.
The shelves have a solid natural cherry wood
facing that can be replaced with other wood to
match your cabinetry. Details on how to
replace the shelves' wood facing can be found
in the Sub-Zero Design Guide or check our
website at subzero.com.
IMPORTANT NOTE: If you choose to stain or
seal the shelves' natural cherry wood facing,
be aware that some of these substances are
hazardous and will damage stored wine.
Your Wine Storage unit is intended to
maximize the storage of bottles in an ideal
environment where the wine stays in contact
with the cork at an even temperature. Refer to
the illustration below for the proper arrange-
ment of bottles on the shelves.
If you are storing half bottles or magnums,
they are nestled in the shelves in the same
manner as the 750 ml bottles.
Wine storage arrangement
U S E & C A R E
When storing magnum bottles you must
remove the shelf just above the intended
storage shelf to allow for these larger
bottles to be moved in and out of the
unit. Failure to do so will cause the
bottles to break.
W I N E S T O R A G E S H E L F R E M O V A L
To remove a wine storage shelf, pull the shelf
out to its full extension, gently and evenly lift
up on both sides of the front of the shelf and
remove. Refer to the illustration below.
Reverse the procedure to reinstall the shelf.
Be sure to unload all bottles from the
wine storage shelf before removing it.
Wine storage shelf removal
D E S I G N
G U I D E
Details on how to
replace the wine
storage shelves'
cherry wood facing
can be found in
the Sub-Zero
Design Guide or
check our website
at subzero.com.
11