InnoCigs Vapanion CASCADE Manuel D'utilisation page 58

VAPANION
CASCADE
Exchange Filling Hole's O-Ring
1. Unscrew the upper part of the top cap with the mouthpiece clockwise.
2. Open ther clearomizer completely by pushing the bottom part of the top cap in the direction
of the arrow.
3. Replace the old O-ring by a new one.
4. Reconnect all parts carefully.
Adjusting the Air Supply
There is an airflow control ring located on the head base. It can be adjusted by slightly turning
and is adaptable to your vapor preferences. The more air flows through the device (the more
the slots are open), the lower is the drawing resistance. Pay particular attention to a sufficient
air supply during sub-ohm vaping.
56
USING THE DEVICE