Troubleshooting Tips; Possible Causes - GE JV936 Mode D'emploi

Before you call for service...

Troubleshooting Tips

Save time and money! Review the chart below first and you
may not need to call for service.
Problem
Fan does not operate
when the switch is on
Fan fails to circulate air
or moves air slower than
normal
18

Possible Causes

A fuse may be blown or a
circuit breaker tripped.
The blower connector is loose
or not plugged into its mating
connector.
Excessively soiled filters.
What To Do
• Replace fuse or reset circuit breaker.
• Disconnect power to the unit. Remove the filters
and look up at the blower. If the blower connector
plug is loose or you see the connector dangling,
the installer failed to plug it in securely. Although it
is a blind connection, it is easy to plug in. See the
Installation Instructions in this manual for the plug
location and how to plug the connector in.
• Remove the filters, clean if necessary and replace
them. If cleaning and replacing the filters does not
correct the problem, call for service.
• Sufficient makeup (replacement) air is required for
exhausting appliances to operate to rating. Check with
local building codes, which may require or strongly advise
the use of makeup air. Visit GEAppliances.com for available
makeup air solutions.