Install Filters; Finalize Installation - GE JV936 Mode D'emploi

INSTALL FILTERS

11
• Remove protective film covering the filters.
• Insert the filter into the "C" clips mounted to the top of
the vertical front panel.
• Tap the filter against one side to align with outside
opening.
• Pull the filter down into the lower slots at the bottom
of the filter support.
"C" Clip
Filters
• To remove the filters, grasp the handle, push the filter
up, and pull forward.
Installation Instructions
Juntion Box
Filter
Support
17

FINALIZE INSTALLATION

12
• Refer to the operating instructions to test all controls.