Erreka VIVO-M201 Manuel De L'installateur page 34

INSTALLATION
Peripheral connections
SMF Signal light card (EPS1-001)
ANT Antenna connector
R.E. Plug-in receiver
A.T. (ST1) Key device
S.EXT (FT1) Exterior safety device (photocell or
mechanical strip)
A.P. (ST2) Pedestrian operation device
S.INT (FT2) Interior safety device (photocell or
mechanical strip)
Fig. 4 Peripheral connections
30
Installation Manual
FCA2 COM FCC2
P1 P2 P3 P4 P5 P6 P15 P14 P16
ST1 FT1 ST2 FT2 FCA1
ST1
FT1
ST2
FT2

Check the accessory instructions to carry out the connections.
SCA
P7 P8 P11 P12 P22 P23 G7 G8 G9 G10
Courtesy
24Vac Lamp.
FCC1 STOP LOCK
Light
VIVO-M201: 230Vac
VIVO-M201M: 125Vac
STOP Emergency stop pushbutton (normally closed)
EC Electrolock (17Vdc)
AUX Output (24Vac, 0.35A)
LG Garage light (courtesy light)
VIVO-M201: 230Vac, max. 2,300W resistive)
VIVO-M201M: 125Vac, max. 1,250W resistive)
DEST Flashing light (max. 40W resistive)
VIVO-M201: 230Vac
VIVO-M201M: 125Vac
SW1 Main switch
G4 G5 G6 G1 G2 G3
N L
POWER
MOTOR2 (G2-G1-COM) MOTOR1 (G2-G1-COM)
(resistive)
VIVO-M201: 230Vac
VIVO-M201M: 125Vac
VIVO-M201: max 2.300W
VIVO-M201M: max 1.250W
(resistive)
P169Z