Operating - Medisana SL 300 connect Mode D'emploi

Tensiomètre pour le bras avec réveil de voyage
Masquer les pouces Voir aussi pour SL 300 connect:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

GB
3 Getting started / 4 Operating
b) The bloodpressure mode
The bloodpressure mode is activated by placing the device in a flat / lying position, e.g.
on a table. In this mode the LC-display shows the latest measurement results of the
current user.

4 Operating

4.1 Device handling in clock / alarm mode
Depending on the toggle switch position of alarm toggle 1
alarm 1 and / or alarm 2 is activated or deactivated (if an alarm is activated, the related
symbol
resp.
alarm toggle (
Setting the date, time and alarms to learn how to adjust the alarm time) and then the
actual date and clock will be shown.
When the set alarm time of an activated alarm is reached (if an alarm is activated, the
related symbol
alarm symbol (
(
or
) to right position.
During an alarm, you may also press the SET / SNOOZE - button
alarm and activate it again 5 minutes later. In this case, the symbol "
the display. The snooze function may be used 6 times in sequence. If you press the
SET / SNOOZE - button
4.2 Device handling in bloodpressure mode
Setting up the user memory
The MEDISANA Upper arm blood pressure monitor with travel alarm clock SL
300 connect gives you the opportunity to assign readings to one of two user memories,
each of which provides 500 memory slots. Press and hold the M-button
seconds, until the symbol for User 1
you can switch User 1 and User 2 or Guest
of the reading will not be saved.
Press the
SET / SNOOZE - button
24
is displayed). If an alarm is activated by moving the respective
or
) to the left, the alarm time will shorty flash (check chapter 3.3
resp.
is displayed), an acoustic alarm is emitted and the related
or
) flashes. To turn off the alarm, put the related alarm toggle
for a 7 time, the alarm will be toggled off constantly.
th
e. g. user 1:
Bloodpressure indicator: Green area
Systolic pressure: 120 mmHg
Diastolic pressure: 80 mmHg
Pulse rate: 80 beats / min.
appears in the display. By pressing M-button
. If you choose "Guest", the values
to confirm your selection.
resp. alarm toggle 2
to pause the
" appears in
for at least 3
i
i
i
i

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

79452

Table des Matières